Sparkit

Blazer

Tailoring & Blazers · tailored fit · Wool Blend

See 4 community designs
Blazer, modelModel
GradePer unit at 100
ColourCream
QuantityUnder 50, a $260 development fee applies

Add 200 more to pay $56.82 / unit.

Size run ·

Kids

Customise

Gabi designs your changes in the Studio, then you order the finished piece. ORDER below makes it as shown.

Delivery
Lead time confirmed with your orderShipping is priced at checkout from your address.
Premium · Cream × 100$65.34 / unit
ShippingAt checkout
Total, before shipping$6,534
Get a team quote

What's included at $65.34

  • Blazer, Premium grade (Wool Blend)
  • Made to order in Cream
  • Your size run, as set above
  • Replaced if anything arrives faulty

Shipping is priced at checkout from your address.

Make it yours

Your logo on the chest, a woven label, a back print, a colour from your brand book: Gabi designs the changes with you in the Studio and prices the finished piece before you order it. Your logo file goes on as you supply it.

Blazer, close-upClose-upFabric and finish
Replaced if faultyMade to order, so no change-of-mind returns. Anything that arrives damaged or defective, we make right.
Try one firstOne unit in Premium, made like the run, through the same checkout.

A regular-length tailored cut with waist suppression and structured, padded shoulders. Peak lapels sit above a 6x2 double-breasted closure, while two-piece set-in sleeves end in vented cuffs with four kissing buttons. The straight hem has rounded front corners, and the jacket closes over the body in an ivory tone.

Specs

GradePremium, Wool Blend
Main Fabric70% Wool / 30% Viscose, 310gsm
Lining100% Viscose
FitTailored
SilhouetteTailored double-breasted
LengthRegular
NecklinePeak lapel with collar stand
SleeveTwo-piece set-in sleeve
HemStraight with rounded front corners
ClosureDouble-breasted, 6x2 button configuration (2 fastening, 4 decorative/anchor), 24L front buttons
CareDry clean only, Do not bleach, Do not tumble dry
Minimum order50 units

Size guide

cmXXSXSSMLXLXXL
Bust42444648505254
Waist38404244464850
Length67.56970.57273.57576.5

The garment measured flat: compare it with one you own.

Similar styles

See all Tailoring & Blazers
Beige Lined Linen Blazer

Beige Lined Linen Blazer

100% Linen

$47.05/ unit at 100

Beige Linen Blazer

Beige Linen Blazer

100% Linen

$47.05/ unit at 100

Beige Two-Button Blazer

Beige Two-Button Blazer

Wool Blend

$47.05/ unit at 100

Encyclopedia

In 1860, a tailor on Savile Row made a jacket for the Prince of Wales.

No tails. No decoration. Just a clean, structured jacket with a notch lapel and two buttons. Everyone said it was too plain. He wore it anyway. That jacket became the blazer. One hundred and sixty years later, every power suit, every fashion-week moment, every oversized street-style co-ord traces its DNA to that plain jacket. The only thing that separates a $50 version from a $5,000 version is what is inside.

Read the story
Encyclopedia

The story of the Blazer

In 1860, a tailor on Savile Row made a jacket for the Prince of Wales. No tails. No decoration. Just a clean, structured jacket with a notch lapel and two buttons. Everyone said it was too plain. He wore it anyway. That jacket became the blazer. One hundred and sixty years later, every power suit, every fashion-week moment, every oversized street-style co-ord traces its DNA to that plain jacket. The only thing that separates a $50 version from a $5,000 version is what is inside.

1970sConstruction shiftFusible interlining enabled mass production of blazers
$300–600Premium standardTypical retail range for half-canvas blazers
Internal constructionQuality differentiatorCanvas vs fused structure defines durability, fit, and price

The Blazer -- "The Only Thing Separating a $50 Version from a $5,000 Version is What is Inside"

The blazer traces its commercial origin to mid-19th century Savile Row, where London tailors developed the lounge suit jacket as an alternative to the formal frock coat. A single-breasted, unstructured-shoulder jacket without tails, worn initially for leisure, it evolved into the standard jacket for both business and casual dress across the 20th century. The construction architecture -- canvas, interlining, lining, pad-stitched lapel -- did not change significantly until the 1970s, when fusible interlining became commercially available at scale.

Fusible interlining transformed the blazer market. A bonded adhesive interlining pressed onto the face fabric provides structure without the skill or time of canvas construction. It allowed factories without specialist tailoring training to produce blazers quickly and cheaply. The quality compromise was real: a fused blazer loses its structure as the adhesive weakens with wear and washing. But the commercial accessibility of fused construction made the blazer a mass-market garment rather than a luxury item.

Half-canvas construction became the premium commercial standard: a natural-fibre canvas chest piece sewn into the jacket front, providing most of the drape and lasting structure of full canvas at significantly lower CMT. Most contemporary premium blazers at the $300-600 retail tier are half-canvas. Full-canvas construction -- the Savile Row and luxury Italian tailoring standard -- requires a skilled tailor to pad-stitch the lapel by hand and build the garment from the inside out. The result moulds to the wearer over time and can be altered and relined indefinitely.

For independent creators, the oversized blazer sits at the intersection of fashion and tailoring without requiring full canvas complexity. Unlined or half-lined with minimal interlining, it is accessible at premium tier without specialist tailoring factory requirements. The co-ord blazer -- matching blazer and trouser or short from the same fabric lot -- is one of the strongest commercial structures in the DTC market.

Articles

Guide · Tailored

$54 to $450: What a Blazer Actually Costs to Make

Fabric, lining, and construction together push blazer landed cost from $54 to $450+. Here are three real cost builds across the range.

Guide · Tailored

Fused, Half-Canvas, or Full-Canvas? The One Choice That Defines a Blazer's Quality

Construction method — not fabric — is the primary quality variable in a blazer. Here's what each tier actually means, and where the CMT gap comes from.

Guide · Tailored

The Lining Mistake That's Instantly Detectable on a Premium Blazer

Bemberg lining is the non-negotiable premium standard. Specify polyester on a premium-positioned blazer and it's detectable the moment someone puts it on.

Guide · Tailored

Why Blazers Bubble After 10 Wears (And How to Stop It)

Interlining bubbling is the characteristic failure mode of fused construction. Here's the root cause, and the exact spec that prevents it.

Guide · Tailored

The $65 Blazer That Retails for $300: The Creator's Entry Point

The oversized unlined blazer sits at the intersection of fashion and tailoring — accessible construction, GOTS story, and one of the strongest margins in the category.

Guide · Tailored

What's Really Inside a $5,000 Blazer vs a $50 One

In 1860, a Savile Row tailor made a plain jacket everyone said was too simple. It became the blazer. 160 years later, the silhouette hasn't changed — only what's inside it.

Questions

Specify woven fusible interlining. Fuse at minimum 150C for 3 minutes under even pressure. Test 20 wash cycles at 30C before bulk approval. Or: specify half-canvas construction to eliminate the risk entirely. A half-canvas blazer cannot bubble.

100 × Premium · Cream

$6,534

SHOPPING BAG

(0 items)